The general principle of the adjustment of the biomass boiler, fuel burning, this is very important for the boiler, and is also a key points of knowledge, and so the following is also very basic and practical, since, talked about it, then immediately to the specific, the hope can give you some help and inspiration. We can harvest.

Biomass boiler, the general principles of its fuel combustion adjustment:

(1) to ensure that the fuel can be continuous input, and if it is dry, the particle size to meet the specified requirements.

(2) the furnace should not leak, and the vibration frequency of the grate should be suitable, it should be adjusted according to the size of the boiler load to make it suitable.

(3) to ensure that the air supply is sufficient, the oxygen should be greater than the pulverized coal stove.

(4) because the grate vibration is a process of mixing again, it is recommended to use a long interval and short vibration in this way, in order to prevent violent disturbance in the furnace, thus affecting the combustion of the fuel.

(5) the heating surface, should prevent ash deposition, coking and corrosion phenomena.